Airknives & Angle of Attack

The effectiveness of airknives will be based in part on the angle at which the forced air exiting the opening strikes the surface to be affected. That is to say airknives that have sharper angles of attack -- 60 to 90 degrees -- will force more air at the 'working suface' versus angles of say, 30 to 60 degrees.

This important design consideration is one 4 that goes into planning an optimum perfoming system for your application. Airknives that meets your requirements must balance:

• Velocity (speed) of Air exiting the air knife to form a good laminar air stream with enough force to move the material. >>read more
• Volume of Air so there is enough mass flow to move particulate, or absorb moisture. >>read more
• Angle of Attack can be critical to achieve optimum impingement on the surface being cleared. >>read more

• Shape of Air Knife Turbotech's unique teardrop shape results in less air spread and achieves up to 95% efficiency of air movement.
  >>read more